Products

  • Dental Chair
  • Air Compressor
  • X-ray Machine
  • Other Device
  • Dental Chair Parts
    ×
    上一张
    下一张

    DTK-026PRX PORTABLE X-RAY MACHINE

    Basic technical specifications 1.1 Environmental ◇ Operation Temperature : 10 ℃ to 35 ℃ Relative humidity : 10% to 85% RH ◇ Storage and transportation Temperature :10 ℃ to 40 ℃ Relative humidity : 5% to 90% RH 1.2 Classification/Specification compliance ◇ MDD(93/42/EEC) : AnnexIX [ Cla

    Product Details

    Basic technical specifications
    1.1 Environmental
    Operation
    Temperature : 10
    to 35
    Relative humidity : 10% to 85% RH
    Storage and transportation
    Temperature :10
    to 40
    Relative humidity : 5% to 90% RH
    1.2 Classification/Specification compliance
    MDD(93/42/EEC) : AnnexIX [ Class II b ]
    IPX specification [ IPO; do not operate under wet conditions ]
    Type of protection against electric shock [ Internal powered device ]
    Degree of protection against electric shock [ Type B applied part ]
    For use in environments where no flammable anesthetics and/or flammable
    cleaning agents are present; non - alcohol based disinfectant only - wipes or cloth
    dampened with liquid/spray.
    1.3 Electrical
    Rechargeable lithium polymer battery : 24V
    Maximum battery charge : 25.2V
    Battery current at 2mA, 60kV output : 10A
    Power supply : JBL7451250750100FJ, BridgePower Corp
    Input : AC100 - 240V, 50-60HZ 1.0A
    Output : DC25.2V, 0.75A
    Cable length of DC output : 1550mm
    Cable length of AC input : 1500mm

    Cable length of remote controller : 3000mm

    1.4 X-ray control and generator
    Exposure time range : 0.01-1.6sec
    Maximum duty cycle : l: 60
    Maximum inherent filtration : 1.6mm Al
    Maximum output power: 120W nominal at 60kV, 2mA
    Generator rating : 2mA at 60kV±5%
    Leakage technique factors: 60kV, 2mA, 1.6sec
    1.5 Collimator cone
    Minimum source to skin distance : 10cm, 20cm (Long Cone)
    X-ray field size and configuration : 6cm diameter circle.
    Shielding : lead - lined.
    2. X-ray tube tank
    2.1 Stationary anode x-ray tube
    Especially designed for dental X-ray unit
    Provided with an insulation cylinder (D-081B)
    This tube have focus 0.8mm, and are available for a maximum tube voltage
    65kV.
    Installed in the same enclosure with the high tension transformer
    GENERAL DATA
    ELECTRICAL
    Operating tube voltage 50 t0 65kV Max.
    Focal spot 0.8mm
    Max. Input energy 600W
    MECHANICAL
    Overall length 69mm
    Max. Diameter 31mm
    Target angle 20°
    Inherent filtration At least 0.8mm Al equivalent at 50kV
    X-ray coverage 354 x 354mm at SID 490mm
    Weight 96g
    Cooling method Oil immersed (600C Max.) and convection oil cooling
    Tube holding Holding the glass envelop of the anode end and
    cathode end, or the screw of the anode shank
    MAXIMAM AND MINIMAM RATING
    (At any time, these values must not be exceeded)
    Max. Tube voltage 65kV
    Max. Inverse tube voltage 75kV
    Min. Tube voltage 50kV
    Max. Tube current 19mA
    Max. Filament current 2A
    Filament voltage : At max. filament current 2.9 to 4.0V
    Thermal characteristics :
    Anode heat storage capacity 6.0 kJ (8.5 kHU)
    Max. Anode heat dissipation rate 128 W (180 HU/s)




    nigelmagic